About Us About Us
News

Answer the industry standard for bimetallic composite hammer heads

2026-03-19 223

According to the search results, the industry standards for bimetallic composite hammers mainly revolve around material properties, process specifications, and testing requirements, as follows:

image.png

1、 Standard formulation and scope of application

Local Standards (Anhui)

Under the jurisdiction of the Standardization Technical Committee of Anhui Province and under the supervision of the Quality and Technical Supervision Bureau of Anhui Province, it is suitable for the casting of hammer heads for crushing machinery in industries such as metallurgy, building materials, mining, and coal.

The hammer head must meet the dual performance requirements of high wear resistance and high impact resistance, and is suitable for crushing medium hardness materials such as limestone and coke.

Group Standard (T-YJC 021-2024)

The casting technology conditions released by the Yantai Technology Innovation Association stipulate the materials, casting processes, testing methods, and inspection rules for bimetallic composite hammers, which will be implemented on January 1, 2025.

2、 Core technical requirements

Hardness and Wear Resistance

The hardness requirement for the hammer end is ≥ HRC58 to ensure wear resistance; The actual wear resistance performance needs to be verified through grinding wheel simulation testing as a whole.

The material combination requires a bimetallic composite structure of high chromium cast iron (wear-resistant layer) and low-alloy steel (toughness layer).

Casting process specifications

Adopting liquid-liquid composite or solid-liquid combined casting technology to ensure a metallurgical fusion rate of ≥ 99% at the interface between the two metals, avoiding delamination or fracture.

Clear limitations on casting defects: No cracks or defects such as shrinkage or porosity that affect performance are allowed.

Performance testing and inspection

Impact toughness testing (such as pendulum impact), hardness testing, and metallographic structure analysis are required to ensure material uniformity and heat treatment effectiveness.

Factory inspection includes appearance, size, hardness, and non-destructive testing. During mass production, destructive testing is required by sampling.

3、 Significance of standard implementation

Unified quality requirements

By specifying material ratios, process parameters, and testing methods, the problem of short lifespan of traditional hammer heads (such as less than 3 months under poor quality coal conditions) can be solved.

Promote technological upgrading

Encourage the use of advanced technologies such as rare earth element optimization of grain boundaries and multi-element alloy strengthening to enhance product competitiveness.

For specific standard documents, please refer to the "Bimetallic Composite Hammer Head" (Anhui local standard) or the full text of the T-YJC 021-2024 group standard.