The hammer head of the crusher, as the core component of the hammer crusher, directly affects the crushing efficiency and service life of the equipment. According to different materials, structures, and applicable scenarios, crusher hammers can be divided into the following categories, each with its unique design characteristics and scope of application.
1、 Classified by Material 1 **High manganese steel hammerhead * * High manganese steel (such as ZGMn13) is the mainstream material of traditional hammerheads, characterized by good toughness and strong impact resistance. Under severe impact conditions, the surface will harden to form a wear-resistant layer. Suitable for crushing medium hardness materials such as limestone and bluestone, but with insufficient wear resistance when facing high hardness materials, it is prone to plastic deformation. *Process improvement *: Some manufacturers increase the initial hardness by adding alloying elements such as chromium and molybdenum, or optimize the internal structure through water toughening treatment.
2. * * High chromium alloy hammerhead * * High chromium cast iron (such as Cr26) has a hardness of HRC58 or higher, and its wear resistance is more than three times that of high manganese steel, but its toughness is lower. Suitable for crushing high hardness materials such as granite and basalt, but with strict requirements for the balance of equipment rotors. *Composite technology *: Some hammer heads adopt a composite casting process of "high chromium alloy head+low-alloy steel handle", which balances wear resistance and fracture resistance.
3. Tungsten titanium alloy hammerhead forms a superhard layer (hardness HRC60+) on the working surface of the hammerhead through processes such as tungsten infiltration and titanium infiltration. It has outstanding wear resistance and is suitable for processing highly abrasive materials such as quartz sand and slag, but the cost is high and it is mostly used for large-scale mining equipment.
4. * * Low carbon alloy steel hammer head * * represented by 42CrMo, after quenching and tempering treatment, it has both strength and toughness, suitable for small hammer breaking machines or intermittent operation scenarios, with high cost-effectiveness but requiring frequent replacement.
2、 Classified by structural design 1 **The integral hammer head is cast as a single unit, with a simple structure and easy installation, commonly used in small crushers. The disadvantage is that it needs to be replaced as a whole after local wear, and the material utilization rate is low. The new design, such as the "symmetrical hammer head", can be interchanged twice to extend its lifespan.
2. * * Combination hammer head * * adopts modular design, and the handle and end of the hammer can be separated. For example: * * Bolt fixed type * *: Connected by high-strength bolts, only the worn end needs to be disassembled for replacement, reducing maintenance costs. -Inlaid hard alloy type: Inlaid tungsten cobalt alloy blocks on the impact surface of the hammer head to enhance the wear resistance of key parts, suitable for crushing cement clinker.
3. * * Welding repair type hammerhead * * The base is made of ordinary steel, which is repaired by welding wear-resistant electrodes (such as D667) after wear. It is suitable for small and medium-sized enterprises with limited funds, but requires professional welding equipment and technology.
3、 Classified by applicable models 1 **The hammer heads of ordinary hammer breaking machines are mostly rectangular or trapezoidal structures, weighing between 5-50kg, suitable for PC, PCZ and other series of hammer breaking machines, emphasizing universality.
2. * * Single stage hammer crusher hammer head * * is specially designed for one-time crushing (such as PCD series), with a hammer head weight of over 120kg. It is made of heavy-duty alloy material to withstand high impact force and is commonly used in limestone crushing on cement production lines.
3. Combined with the working principle of the counterattack plate, the hammer head of the counterattack machine is designed with hooks or edges (such as "eagle beak" shape) to enhance the probability of material collision and improve the efficiency of fine crushing.
4、 Special function hammer head 1 **The spinning hammer head * * is designed with an eccentric shaft to automatically rotate during operation, evenly wear down all working surfaces, and extend its lifespan by more than 30%. Representative models include some German imported equipment accessories.
2. Hollow structure hammerhead with internal cooling channels designed to reduce working temperature through airflow or liquid circulation, avoiding material degradation under high-temperature softening conditions, suitable for metal ore crushing.
3. * * Noise reduction and shock absorption hammer head * * Rubber buffer layer or honeycomb structure is added to the handle of the hammer to reduce the noise and vibration during crushing, which meets the strict environmental protection requirements of urban construction standards.
5、 Selection suggestion 1 **Material matching principle * * - Soft materials (compressive strength150MPa): High chromium alloy or tungsten titanium alloy hammers must be used.
2. * * Economic evaluation * * Calculated based on the cost of crushing materials per ton, although high chromium alloy hammers have a high unit price, their long-term usage cost may be lower than that of cheap hammers that are frequently replaced. Suggest considering the wear rate and replacement time comprehensively.
3. * * Maintenance precautions * * - Regularly check the wear of the hammer head. If the wear on one side exceeds 15mm, it should be adjusted or replaced in a timely manner. -Replacement should be carried out in groups to avoid rotor dynamic balance imbalance. -It is prohibited to crush beyond the specification (such as feeding particles with a diameter greater than 30% of the design value) to prevent the hammer head from breaking.
With the advancement of materials science, hammer heads will develop towards "gradient materials" (gradually increasing hardness from the surface to the interior) and "intelligent monitoring" (embedded wear sensors) in the future. Current users can choose the optimal solution from the above categories based on actual production capacity requirements, material characteristics, and budget.