About Us About Us
News

Performance parameters and application fields of high chromium ceramic composite hammer heads

2026-10-10 65

  High chromium ceramic composite hammer head is a new type of wear-resistant crushing accessory formed by metallurgical bonding of high hardness ceramic particles with high chromium alloy working face and high toughness alloy steel hammer handle.It solves the industry pain point of traditional hammer heads that are"easy to break if they are wear-resistant,and not wear-resistant if they are impact resistant".Its service life can reach 3-5 times that of traditional high manganese steel hammer heads,and it is a mainstream upgraded accessory for heavy industry crushing scenarios such as mining and cement.

  Core performance parameters

  Workface hardness:HRC58~63.The embedded chromium carbide hard phase works synergistically with ceramic particles to effectively resist the chiseling wear of high hardness materials,and its wear resistance far exceeds that of ordinary high chromium hammer heads.

  Impact toughness:The handle of the hammer is made of low-alloy steel material with an impact toughness of≥15J/cm²,which is less prone to brittle fracture under high-speed crushing and strong impact loads,greatly improving the reliability of crack resistance.

  Interface bonding strength:Using patented bimetallic composite casting technology,the high chromium ceramic working layer and alloy steel hammer handle achieve atomic level metallurgical bonding,eliminating common delamination and peeling problems during use from the root.

  Suitable for material hardness:It can handle various highly abrasive materials with compressive strength≤220MPa,and is compatible with mainstream crushing equipment such as hammer crushers,sand making machines,and fine crushers.

  Service life:Under conventional limestone and coal gangue crushing conditions,the continuous operation life can reach 8000-15000 hours,reducing the replacement frequency by more than 70%compared to traditional high manganese steel hammers.

fd97734f33f90c12022d54a679539b61.jpg

  Core application areas

  Mining industry:adapted to the rough and medium crushing processes of metal mines such as gold,iron,and copper mines,as well as the crushing of highly abrasive materials such as tailings and bauxite,significantly reducing the consumption cost of vulnerable parts in mining crushing production lines.

  Cement and building materials industry:specifically optimized material formula for limestone and clinker crushing conditions in cement plants,capable of long-term stable processing of high hardness siliceous limestone,ensuring uniform particle size of discharge and reducing production line downtime for maintenance.

  Electric power industry:widely used in power plant crushers,coal mills,and fine crushers to process materials such as coal gangue,coal,and slag.It is the core wear-resistant component of coal transportation systems in thermal power and coking plants.

  Sand and Building Materials Industry:Suitable for crushing and sand making scenarios such as sand and gravel yards,concrete sand making,dry powder mortar,quartz sand,power plant desulfurization gypsum,etc.Different specifications can be customized to adapt to various domestic and imported sand making machines.

  Other scenarios:It can also be used for crushing waste residue and solid materials in industries such as metallurgy and chemical engineering,and is suitable for upgrading and renovating various hammer crushing equipment.

  Key points of selection

  For high hardness metal ore crushing scenarios,customized products with a higher proportion of ceramic particles are preferred to further enhance the wear resistance of the working face.

  The toughness level of the hammer handle alloy steel can be appropriately increased for rough fracture conditions under high impact loads to avoid fracture failure under strong impact.

  Prioritize selecting legitimate manufacturers with full process spectroscopic and metallographic testing capabilities to ensure defect free composite interfaces and avoid early delamination and cracking problems in small factory products.