About Us About Us
News

Introduction to bimetallic composite hammer head

2026-08-21 124

  The bimetallic composite hammer head is the core wear-resistant component of the hammer crusher.It combines two different performance metal materials through a special composite process,balancing high wear resistance and strong impact toughness.It is currently a widely used high-performance hammer head type in the crushing industry.

  1、Core Structure and Materials

  Hammer end working area:Made of high chromium alloy material with a hardness of HRC58~65,it has extremely strong wear resistance and can directly contact and strike materials.

  Hammer handle installation area:Made of low-alloy steel/high manganese steel material with excellent toughness,it is not easy to break or fall off during the crushing process.

fd97734f33f90c12022d54a679539b61.jpg

  Composite process:The mainstream adopts the dual liquid(liquid-liquid)composite casting process,in which two metals melt into one in a molten state,and the composite area can reach 100%,far superior to the bonding effect of alloy inlay and double casting.

  2、Key performance advantages

  Long service life:The service life can reach 3-5 times that of traditional high manganese steel and forged hammer heads,and some high-quality products can operate stably for more than 6000 hours.

  Comprehensive performance balance:solves the industry pain point of"high hardness leads to poor toughness,and good toughness leads to non wear resistance"for single material hammer heads.

  Strong impact resistance:able to withstand high-intensity mechanical and thermal impacts,suitable for more complex crushing scenarios.

  High crushing efficiency:Compared with traditional hammers,the crushing efficiency can be increased by more than 30%,and the discharge particle size is more uniform.

  3、Mainstream manufacturing process

  Basic casting process:commonly used lost foam casting method,with high dimensional accuracy and dense internal structure of the finished product.

  Heat treatment process:Heat to 950-1000℃for insulation,then mist quench,and then low-temperature tempering at 200-260℃to achieve the desired hardness.

  Composition optimization:Adding elements such as vanadium,titanium,and rare earths to the base alloy to refine the grain size,further improving wear resistance and impact resistance.

  Quality control:Analyze the elemental composition through a spectrometer,detect internal defects with a flaw detector,and test each piece with a hardness tester.Unqualified products will not be shipped.

  4、Applicable scenarios and scope

  Suitable materials:can crush various high hardness and strong abrasive materials such as basalt,quartz,limestone,cement clinker,coal gangue,etc.

  Industry coverage:Widely used in industrial scenarios such as mines,cement plants,stone plants,machine-made sand plants,coking plants,power plants,etc.

  Adaptation equipment:Suitable for various types of hammer crushers and fine crushers,supporting customized specifications of 3kg~100kg according to drawings.